چکیده:
به کارگیری مواد تغییر فاز دهنده (PCM) در بخشهای مختلف ساختمان به دلیل بالا بودن ظرفیت گرمایی این مواد، به بهبود شرایط آسایش حرارتی و کاهش مصرف انرژی میانجامد. با توجه به عملکرد بهتر این مواد در شرایط دمایی با نوسانات شدید، کاربرد آنها در اقلیم کویری در کاهش مصرف انرژی و کاهش نوسانات تأثیر زیادی دارد. در تحقیق حاضر شرایط دمایی گرم کاشان به عنوان دمای محیط و دیوارها با بتن معمولی به ضخامتهای 10 و 20 سانتیمتر و ارتفاع 100 سانتیمتر در نرمافزار فلوئنت مدلسازی شدهاند. چند نوع ماده تغیر فاز دهنده برای این شرایط دمایی در نظر گرفته شده است و بهترین نوع آن انتخاب شده است. نتایج عددی نشان میدهد که وجود ماده تغیر فاز دهنده نوسانات دمایی سطح داخل دیوارها را تا حدود 4 درجه سانتیگراد کاهش میدهد و همچنین موقعیت آن در سمت داخلی دیوار عملکرد بهتری دارد ولی به طور کلی تغییر در موقعیت ماده تغیر فاز دهنده تأثیر زیادی بر روی نتایج نهایی ندارد. علاوه بر آن تغییر در تعداد ضخامت ماده تغیر فاز دهنده تأثیر زیادی بر عملکرد دمایی آن ندارد. با توجه به نتایج برای منطقه کاشان پارافین عملکرد بهتری از خود نشان می دهد و به عبارت دیگر برای هر منطقه باید ماده تغیر فاز دهنده متناسب با آن مورد استفاده قرار گیرد.
The application of phase change materials (PCM) in the variant parts of building because of the high capacity these materials, lead to an improvement in temperature conditions and reduction in energy consumption. Due to the high dependency of the performance of these materials to the ambient temperature fluctuations, their applications in climates with extreme temperature fluctuations has a significant impact on reducing the temperature fluctuations inside the building as well as energy consumption. In this study Kashan hot temperature conditions as ambient temperature, walls with normal concrete, thickness of 10 and 20 cm and height of 100 cm were modeled in FLUENT software. Some kinds of PCM for these temperature conditions were considered and the best was chosen. Numerical results show that, the presence of PCM reduces the temperature fluctuations of the inner surface of walls about 4 ° C and the position in the inner surface have better result but totally changing in PCM position does not have great impact on ultimate results. Moreover, changing in number of PCM thickness does not have great influence on the temperature function. According to the result, Parafin has better function for Kashan and for every climate, appropriate PCM should be chose.