چکیده:
با توجه به اهمیت واحد پردازش در خط تولید صنعتی کمپوست، پژوهش حاضر با هدف مدلسازی موازنه مواد در خطوط پردازش کارخانه تولید کمپوست بابل با ظرفیتهای ۱۰۰ تن و ۲۵۰ تن پذیرش پسماند مخلوط شهری در روز، بر پایه تابع انتقال فاکتور بازیابی (RFTF) انجام گرفت. بدین منظور پس از برداشت میدانی از ورودی و خروجی دستگاههای خطوط پردازش کارخانه کمپوست بابل در مقاطع زمانی مختلف و آنالیز کمی و کیفی ترکیبات تشکیل دهنده پسماندهای ورودی، مدلسازی موازنه مواد در سیستم پردازش پسماندهای شهری بر پایه RFTF صورت گرفت. محاسبات برای خطوط پردازش کمپوست انجام گرفت و دیاگرام موازنه مواد استاندارد برای خط پردازش در هر دو وضعیت تهیه شد. مطابق یافتهها، خط پردازش جدید کارخانه تولید کمپوست بابل دارای عملکردی مطلوبتر نسبت به خط پردازش قدیمی این کارخانه است؛ به نحوی که خط جدید توانسته میزان پسماندهای دفنی (ریجکتی نهایی خط پردازش) را به میزان ۸۴/۱۹ درصد نسبت به خط قدیمی کاهش دهد. همچنین راهاندازی خط پردازش جدید، میزان مواد آلی جداسازی شده که جهت تولید کمپوست به فاز تخمیر و هوادهی منتقل میشود را به میزان ۳۹/۱۹ درصد افزایش داده و نسبت مواد استحصال شده دارای ارزش اقتصادی را نیز به میزان ۴۵/۰ درصد بهبود بخشیده است.
Effectiveness of the separate collection system is the most important thing in the production of high-quality compost. The present work aims to analyzed the mass balance of two separating machine components used in Babol composting facility (with capacity of 100 ton/day and 250 ton/day) based on recovery factor transfer function (RFTF) model to evaluate their efficiency. After sampling from the input and output of the processing line machines and quantitative and qualitative analysis of the waste, material balance was modeled based on RFTF. Calculations were performed for compost processing lines and a standard material balance diagram was prepared for both separation systems. Results showed that the new processing line of the Babol composting facility (with a capacity of 250 ton/day) has a more favorable performance compared to the old processing line (with a capacity of 100 ton/day). The new line reduced the amount of rejecting waste (refuse compost) by 19.84% compared to the old processing line. Also, by using this processing line, the amount of separated organic waste which will be later used in the fermentation and aeration phase of compost production was increased by 19.39%. In addition, the ratio of extracted materials with economic value was increased by 0.45%.