خلاصة:
یکی از عوامل ایجادکننده حرکت های توده ای وجود گسل می باشد. حوضه مورد مطالعه در این تحقیق، حوضه خضرآباد بوده که یکی از زیر حوضه های دشت یزد– اردکان در دامنه شمالی رشته کوه های شیرکوه یزد بین 30-41- 53 تا 00-12- 54 طول شرقی و 00-46- 31 تا 00-06- 32 عرض شمالی واقع گردیده است و بالغ بر 418 کیلومتر گسل در این حوضه وجود دارد. این حوضه بخشی از شهرستان صدوق بوده و در جنوب این شهرستان واقع شده است. همچنین مساحت حوضه برابر 105995 هکتار می باشد. در این پژوهش زون گسله از طریق شاخص های ژئومورفیک مورد شناسایی قرار گرفته و برای اثبات فعال بودن منطقه از شاخص سینوزیته جبهه کوهستان و با تشخیص خطوارگی سازندهای سنگی از طریق عکس های هوایی، تصاویر ماهواره ای (سنجش از دور) و نقشه های زمین شناسی اقدام شد که این شاخص در پهنه شرقی 1.2 و در پهنه غربی 1.3 شد که نشان از فعال بودن حوضه از نظر مورفوتکتونیکی می باشد. سپس با شناسایی زون گسله در منطقه و شناخت گسل های اصلی و فرعی و تهیه نقشه گسل ها در محیط Arc GIS تاثیر زون گسله در ایجاد حرکت های توده ای مورد ارزیابی قرار گرفت. همچنین با تهیه نقشه DEM منطقه و تلفیق آن با لایه های دیگر و تهیه نقشه های شیب و جهت در نهایت تعداد 44 مورد ریزش سنگی و 12 مورد ریزش بلوکی که همگی در نزدیکی گسل های منطقه می باشد شناسایی شده که نشان از نقش زون های گسله و گسله اصلی در ایجاد حرکت های توده ای می باشد.
One of the causes of mass movement is the presence of faults. The studied basin in this research was Khezr-Abad Basin, one of the sub-basins of Yazd-Ardakan plain on the northern slope of Shirkouh mountain range in Yazd which is located between 53 - 41'-30" up to 54 - 12' of east longitude and 31- 46'-00 up to 32-06'-00 of north latitude. and there are over 418 km of faults in the basin. This basin is part of the city of Sadukh and located in the south part of the city. In this study, the fault weight were identified through the geomorphic indicators and In order to prove the region's activation, the mountain front sinuosity index and rock formations photo lineament recognition through areal photos, satellite photos (remote sensing) and Geology Maps has been performed that the index action in the East Zone was 1.2 and in the western zone was 1.3, which indicates that the basin is morph tectonically active. Then by identifying the fault zone in the region and identifying the main and minor faults and preparing faults maps in the Arc GIS, the effect of the fault zone on the formation of mass movements was evaluated.