خلاصة:
اهداف: پس از توجه مجامع جهانی به مصرف بهینهی انرژی، جدارههای خارجی بناها تبدیل به یکی از مهمترین بخشها در پروسهی طراحی شد. اولین تصمیمها، بر مبنای هوابندی و عایقبندی جدارهها، جهت جلوگیری از اتلاف انرژی، و جداسازی کامل فضای خارج و داخل بود. اما در مراحل بعدی نیاز به ایجاد جریان هوا مطرح شد. هدف از این مقاله، بررسی میزان تاثیرگذاری نوع جریان هوا و همچنین فاصله بهینه بین دوجداره، در اقلیم گرم و مرطوب ایران (جزیره کیش) است.
روشها: برای دستیابی به این هدف، پیکرهبندیهای مختلف نمای دوپوسته، با استفاده از شبیهسازیهای کامپیوتری (نرمافزار فلوئنت) مورد بررسی واقع شدهاند. دو نوع جریان هوای تخلیه هوا و لایه هوای خارج بررسی شد؛ هر یک از این دو جریان با سه فاصله متفاوت، 1000، 1500 و 2000 میلیمتر شبیهسازی شدند. در این نوشتار از روش "تحقیق شبیهسازی و مدلسازی" استفاده شده است. در بخشهای شبیهسازی نرمافزاری وتحلیل عددی نوع تحقیق "کمی" و روش تحقیق "تحلیلی" است و دستیابی به نتایج براساس "استقراء" صورت میگیرد.
یافتهها: نتایج حاصل از این پژوهش نشان میدهد که در زمانهای اوج گرما و رطوبت که هوای بیرون در حالت آسایش نیست، نوع تخلیه هوا، باعث بالا رفتن دما و رطوبت داخل دفاتر شده و آسایش حرارتی ساکنان و کاربران را با مشکل روبهرو میکند.
نتیجهگیری: در روزها و ماههای گرم لازم است از نوع لایه هوای خارجی استفاده شود. همچنین مشخص گردید که در صورت استفاده از حالت تخلیه هوا، عمق بهینه حفره هوا2000 میلیمتر و در حالت لایه پرده هوای خارجی، 1000 میلیمتر است.
Aims: After the attention of the global associations to optimal using of energy, exterior walls of the buildings became one of the most important parts of the designing process. This paper aims to investigate the effect of airflow type and also the optimum spacing between two walls in this façade in the warm and humid and climate of Iran.
Methods: In order to achieve this goal, various configurations of double-skin facades have been investigated using computer simulations (Fluent software). Two types of air evacuation of airflow and external air layer were investigated; each of these two flows was simulated with three different distances of 1000, 1500, and 2000 mm. In this paper, the simulation and modeling research method has been used. In the software simulation and numerical analysis sections, the type of research is quantitative and the research method is analytical, and the results are obtained based on induction.
Findings: The results of this study show that during the peak periods of heat and humidity, when the outside air is not in a comfort state, the type of air evacuation causes high temperature and humidity inside the offices, and make trouble for the thermal comfort of the residents and users.
Conclusion: In warm days and months, it is necessary to use an external air layer. It was also found that in the case of using air evacuation, the optimum depth of air cavity is 2000 mm and in the case of external air, curtain layer is 1000 mm.