خلاصة:
صنایع کاغذسازی به علت مصرف بالای آب طی فرآیند تولید و وجود الیاف و آلودگی های سلولزی جز صنایع بزرگ تولید کننده پساب محسوب می شود. به علت وجود ناخالصی های معلق و کلوئیدی و همچنین رنگ و بوی زیاد در این نوع فاضلاب ها، فرآیند تصفیه ی آن را با پیچیدگی همراه کرده است که بر این اساس، استفاده از منعقد کننده های شیمیایی به روش تست جار جهت حذف آلودگی های موجود گزینه ی مناسبی می تواند باشد؛ در این تحقیق غلظت های مختلف از ۳ منعقد کننده ی آلوم، PAC و FeCl۳ برای کاهش بار آلودگی فاضلاب خروجی از ۳ واحد عمده تولید کننده فاضلاب الیاف دار در کارخانه ی چوب و کاغذ چوکا مورد بررسی قرار گرفتند که با توجه به نتایج به دست آمده، منعقد کننده FeCl۳ ، به عنوان بهترین منعقد کننده ی شیمیایی به ترتیب با درصد های حذف COD۶۱%، ۰۵/۷۴% و ۵۸% از فاضلاب ۳ واحد نامبرده شناخته شده است. بنابراین روش تصفیه شیمیایی با استفاده از منعقد کننده ی مناسب با غلظت بهینه در کاهش بار آلودگی فاضلاب نقش موثری خواهد داشت.
Pulp and paper mills consider as a major
wastewater producer industries in order to
cellulosic pollution and also consuming high
amount of water during the process.The
wastewater treatment process is complicated
because these kinds of effluents contain suspended
& colloidal impurities and color & odor; so using
chemical coagulants via the Jar test can be an
appropriate alternative to remove the contaminants.
In this research, different concentrations of Alum,
PAC and FeCl3 coagulants were tested to reduce
the contamination load of the effluent from three
important major parts of fiber wastewater
producers; that, according to the results FeCl3 was
reported as the best chemical coagulants which
removed 61%, 74/05 % and 58% of the COD from
the three mentioned parts effluent. Therefore,
chemical treatment by using of an appropriate
coagulant with the optimum concentration can
perform an important role in reducing the effluent
contamination load.