خلاصة:
مقارن با بحران انرژی در جهان، تلاشها در جهت کاهش مصرف انرژی در حوزه ساخت و ساز، و بهبود عملکرد انرژی در ساختمان بسیار مورد توجه قرار گرفته است. طراحی و ساخت مناسب عناصر و اجزاء ساختمان میتواند باعث کاهش مصرف انرژی، کاهش تأثیرات منفی بر محیط زیست و صرفهجویی اقتصادی در طول چرخه حیات ساختمان شود. پنجره و سطوح شیشهای معمولاً عنصر نما با کمترین مقاومت حرارتی و کم ضخامتترین عنصر سازنده همراه با بالاترین رسانایی گرمایی در ساختمان است. در شرایط استاندارد، پنجره و تهویه دو سامانه جدا از هم هستند که فقدان سیستم مدیریت صحیح میتواند مصرف انرژی در ساختمان را افزایش دهد. در این مطالعه استفاده از پنجره هواگذر به عنوان راهحلی مناسب و روشی غیرفعال در کاهش مصرف انرژی ساختمان معرفی شد و فاکتورهای ترکیبی همچون استفاده از لایههای پوشش کمگسیل و مواد تغییر فازدهنده در بهبود عملکرد حرارتی این نوع پنجرهها و کاهش بار سرمایشی و گرمایشی ساختمان مورد واکاوی قرار گرفت. روش پژوهش، توصیفی- تحلیلی با مطالعه کیفی بود. ابزار جمعآوری اطلاعات، بررسی منابع مکتوب، اسناد، مدارک، مطالعات پیشین و روش تجزیه و تحلیل دادهها، تحلیل محتوا بود. نتایج مطالعه نشان داد که استفاده از پنجرههای هواگذر در ترکیب با مواد تغییر فازدهنده و سایهبانهای داخلی جاذب یا انعکاسی با قابلیت تغییر وضعیت در فصول سرد و گرم سال، میتواند با ایجاد عملکردی پویا در فصول مختلف، تأثیر قابل توجهی در کاهش بارگرمایشی و سرمایشی و کاهش مصرف انرژی در ساختمانها داشته باشد.
The efforts to reduce energy consumption, and improve energy performance in buildings, have received much attention in the field of construction, coinciding with the energy crisis in the world. Proper design and construction of building elements and components can reduce energy consumption, reduce negative impacts on the environment and save money throughout the life cycle of the building. The window is usually the facade element with the lowest thermal resistance and the thinnest component with the highest thermal conductivity in the building. Under standard conditions, windows and ventilation are two separate systems, that the lack of a proper management system can increase energy consumption in the building. In this study, the use of airflow window was introduced as a suitable solution and a passive method to reduce the energy consumption of the building, and the effect of combined factors such as low emission coating layers and phase change materials was investigated in improving the thermal performance of this type of windows and reducing cooling and heating load of the building. The research method was descriptive-analytical with a qualitative study. The data collection tool was a review of written sources, documents, and previous studies, and the method of data analysis was content analysis. The results of the study indicated that using the airflow windows in combination with phase change materials and absorbent or reflective internal curtains with the ability to change the position in the cold and hot seasons of the year, can create a dynamic performance in different seasons, and have a significant effect on reduction of heating and cooling loads and energy consumption in the buildings.
ملخص الجهاز:
کاهش مصرف انرژي در ساختمان در پرتو ارتقاء عملکرد حرارتي پنجره هاي هوا گذر Energy Consumpton Reducton in Building in the Light of Thermal Performance Improvement in Airfow Windows مهدي يزديان ١، مهجبين ردايي ٢، احمد زکي زاده ٣ چکيده مقارن با بحران انرژي در جهان ، تل ش ها در جهت کاهش مصرف انرژي در حوزه ساخت وساز و بهبود عملکرد انرژي در ساختمان بسيار مورد توجه قرار گرفته است .
نتايج مطالعه نشان داد که استفاده از پنجره هاي هوا گذر در ترکيب با مواد تغيير فاز دهنده و سايه بان هاي داخلي جاذب يا انعکاسي با قابليت تغيير وضعيت در فصول سرد و گرم سال ، مي تواند با ايجاد عملکردي پويا در فصول مختلف ، تأثير قابل توجهي در کاهش بار گرمايشي و سرمايشي و کاهش مصرف انرژي در ساختمان ها داشته باشد.
پي نوشت 1- European Environment Agency )EEA( 2- Demirbilek 3- Ghisi and Tinker 4- Li 5- Zemmouri & Schiler 6- Sabouri & Mohd Zain 7- Window to- wall rato (WWR) 8- Yang 9- Goia 10- U value 11- SHGC 12- Alawadhi 13- Window Shuter 14- PCM 15- Air supply 16- Air exhaust 17- Outdoor air curtain 18- Indoor air curtain 19- Low-Emissivity 20- SHGC 21- Electro-chromic )EC( 22 - Gasochromic )GC( 23 - Thermo-chromic )TC( 24 - Photo-chromic )PC( 25 - Low-E 26 - UV 27 - IR 28 - Phase Change Material )PCM( 29 - Latent heat thermal energy storage 30 - PCM enhanced ventlated window (PCMVW) 31 - Ventlated window without PCM (VW, no PCM) 32 - Normal window without both ventlated window and PCM (no VW, no PCM) 33 - Skaf & Gosselin 34 - Hu منابع - دقيق ، روناک .