خلاصة:
این مقاله به ارائۀ یک شاخص جدید سنجش پایداری ولتاژ مبتنی بر روش آنالیز برداری میپردازد. اساس استخراج شاخص پیشنهادی، اندازهگیری بههنگام از توانهای اکتیو و راکتیو ورودی و خروجی شینههای متصل به شینههای ژنراتوری است. در این راستا با توجه به قضیۀ حداکثر توان انتقالی از یک ژنراتور به بار متصل به آن، حدی برای شروع فروپاشی ولتاژ تعیین میشود. از طرفی در مواردی که سیستم قدرت نیازمند حذف بار است، یک حذف بار جدید ولتاژی/ فرکانسی ارائه شده است. ساختار این حذف بار بهگونهای است که با تقسیمبندی بارهای شبکه بهعنوان بارهای مجاز و غیرمجاز جهت خروج و اولویتبندی خروج بارهای مجاز، پایداری ولتاژ و فرکانس شبکه تضمین خواهد شد. شبیهسازیها در محیط نرمافزار دیگسایلنت بر روی شبکۀ استاندارد 39 شینۀ IEEE، صحت و کاربرد بسیار مناسب روش پیشنهادی را نسبت به سایر روشها نشان میدهد.
This paper proposes a new voltage stability assessment method based on the vector analysis method. This index extraction process relies on the measurement of active and reactive powers from connected buses to generator buses. Therefore, a limit for the beginning of voltage collapse is determined based on the maximum power transfer theory. Furthermore, when the system requires load shedding, a new voltage-frequency load shedding is employed. This load shedding makes the voltage and frequency stabilities to be guaranteed via clustering all loads as allowable and unallowable while prioritizing allowable cases. Simulation results in DIGSILENT Power Factory software on IEEE-39 bus dynamic test system demonstrate the efficiency of proposed approach with respect to other methods.