Abstract:
امروزه آلودگی محیط زیست با فلزات سنگین به مسئله ای جهانی تبدیل شده است. فلزات سنگین می توانند از طریق منابع انسانی و طبیعی وارد محیط زیست شوند. خاک می تواند آلودگی های زیست محیطی را در خود نگه دارد و از طریق آنالیز شیمیایی خاک می توان به این آلودگی ها پی برد. هدف از این تحقیق میدانی، بررسی میزان آلودگی خاکهای اطراف کارخانه سیمان ایلام به فلزات سنگین و سمی می باشد. در این راستا تعداد 20 نمونه خاک در جهات مختلف برداشت و غلظت عناصر روی، کبالت، منگنز، مولیبدن، کادمیوم، مس، سرب، کروم و نیکل در نمونه های خاک با استفاده از دستگاه جذب اتم اندازه گیری شد. به منظور درک بهتر چگونگی پراکنش فلزات مورد مطالعه از روش های زمین انباشت، فاکتور آلودگی، درجه آلودگی اصلاح شده و شاخص بار آلودگی استفاده شد. نتایج نشان داد که هرچند منطقه مورد مطالعه نسبت به همه فلزات سنگین غیر آلوده بوده است اما ضریب همبستگی عناصر در جهات مختلف نشان می دهد که بیشترین ضریب همبستگی برای عناصر به طرف شمال غرب منطقه و همسو با باد غالب منطقه می باشد. بنابراین جهت وزش باد در پراکنش عناصر مؤثر بوده و در اکثر نقاط با دور شدن از کارخانه غلظت عناصر کاهش یافته است.
Nowadays, environmental pollution with heavy metals has become a global issue. Heavy metals can enter the environment through human and natural resources. Soil can hold environmental pollution and these pollutants can be checked by chemical analysis. The purpose of this field survey is assessment of soil pollution by heavy metals around Ilam Cement factory. In this regard, a total of 20 soil samples taken in different directions and the concentration of Zinc, Cobalt, Manganese, Molybdenum, Cadmium, Copper, Lead, Chromium and Nickel in soil samples was measured using atomic absorption spectrometry. In order to better understand about distribution of heavy metals, Geoaccumulation Index, Contamination Factor, modified Contamination Degree, Pollution Load Index methods applied. Results showed that although the concentration of all of heavy metals in the study area is less than standard but the correlation coefficient (R2) of elements in different directions show that the highest correlation coefficient for elements is in the North West direction of study area which is in agreement with main winds direction in the region. So wind direction is effective in elements distribution and their concentration decreased with distance from the factory.