Abstract:
ذرات نیمرسانایCFTS با ساختار (Cu2FeSnS4) بهعنوان یکی از جدیدترین مواد درزمینۀ لایۀ جاذب سلولهای خورشیدی لایۀ نازک و لایۀ واسط در سلولهای خورشیدی پروسکایت مورد توجه پژوهشگران قرار گرفته است. این ساختار نوع P ، بهدلیل استفاده از عناصر فراوان در پوستۀ زمین، نوار انرژی مستقیم در محدودۀ شدت تابش خورشید و ضریب جذب بالا (104 cm−1) امیدها را برای دستیابی به ساختاری کارآمد با هزینۀ پایین بهشدت افزایش داده است. ساخت نانو ذرات نیمرسانای CFTS از طریق فرایند سولوترمال با پیشمادههای در دسترس و ارزان انجام شد. به جهت بررسی میزان بلورینگی و جهت رشد بلوری ساختار از آنالیز XRD، توپوگرافی ذرات ازطریق تصویربرداری میکروسکوپ الکترونی روبشیFE-SEM و درصد عناصر ساختار ازطریق آنالیز EDS انجام شد. ازطریق طیفسنجی UV-Vis و با آنالیز طیف جذب ساختار، نوار انرژی ذرات محاسبه شد. نتایج حاصل از آنالیز XRD، نشانگر تشکیل ساختاری با خلوص بالا و میزان بلورینگی مطلوب بود. اندازۀ متوسط ذرات در محدودۀ m1-2μ به دست آمد و ذرات بهصورت کرههای یکنواخت با سطحی ورقهای شکل ساخته شدند. نتایج حاصل از آنالیز EDS نشانگر درصد مطلوب عناصر ساختار بود و میزان نوار انرژی ذرات در محدودۀ eV 43/1 محاسبه شد که با مقادیر گزارششده مطابقت خوبی دارد.
CFTS semiconductor particles with the structure of Cu2FeSnS4 have attracted the attention of researchers as one of the newest materials in the field of absorber layer of thin film solar cells and interlayer layer in perovskite solar cells. This P-type structure has greatly raised the hopes to achieve an efficient low-cost structure due to the use of abundant elements in the earth's crust, direct band gap in the range of solar radiation intensity, and high absorption coefficient (104 cm−1). Synthesis of CFTS semiconductor nanoparticles was performed through a solvothermal process with simple and cheap precursors. The degree of crystallinity and the direction of crystal growth of the structure were evaluated by XRD analysis. The topography of the particles was carried out through a field emission scanning electron microscope (FE-SEM), and the percentage of the elements of the structure was determined through EDS analysis. The band gap of the particles was calculated through UV-Vis spectroscopy and absorption spectrum of the structure. The results of the XRD analysis indicated the formation of a structure with high purity and a favorable degree of crystallinity. The average size of the particles was obtained to be in the range of 1-2 µm, and the particles were uniform spheres with a sheet-like surface. The results of EDS analysis indicated the optimal percentage of structural elements, and the band gap of particles was calculated to be in the range of 1.43 eV, being in good agreement with the reported values.