چکیده:
اهداف و زمینه ها: با توجه به اینکه بخش وسیعی از ایران در مناطق خشک و نیمهخشک قرار دارد و هر ساله فرسایش بادی و وقوع طوفانهای گرد و غبار خسارتهای قابل توجهی بر منابع زیستی و اقتصادی وارد میکند، لزوم بررسی فرسایش احساس میشود. این پژوهش با هدف بررسی توان رسوبزایی رخسارههای ژئومورفولوژی شهرستان گناباد انجام شد.
روششناسی: تعیین شدت فرسایش بادی، با استفاده از تونل باد و مدل تجربی اریفر انجام گرفت. ابتدا نقشه رخسارههای ژئومورفولوژی منطقه تهیه شد. در منطقه، 17 رخساره شناسایی و پس از بررسی، مناطق کوهستانی و فاقد پوشش خاکی و مناطقی که پتانسیل ایجاد گرد و غبار نداشتند از نمونهبرداری حذف گردید. عملیات برداشت نمونه از 14 رخساره باقیمانده انجام گرفت. نمونهها توزین و به مدت 10 دقیقه در دستگاه تونل باد با سرعت 10 متر در ثانیه قرار داده و سپس مجدد توزین گردید. اختلاف وزن حاصل بیانگر میزان فرسایش بادی از یک سطح معین بود. همچنین در مدل اریفر 1، 14 رخساره براساس نظر کارشناس وزندهی شد.
یافته ها: براساس نتایج تونل باد، میزان فرسایش بادی در منطقه مورد مطالعه در رخساره تپه های ماسهای، بیشترین و در دشتهای با پستی و بلندی و فرسایش آبی نسبتاً زیاد، کمترین مقدار و براساس مدل اریفر 1 در رخساره تپه های ماسهای بیشترین و دشتهای با پستی و بلندی و فرسایش آبی کم و سنگریزه زیاد کمترین مقدار بود. نقشه حساسیت به فرسایش بادی در منطقه مورد مطالعه تهیه و به 5 کلاس توده سنگی و غیر قابل فرسایش، حساسیت خیلی کم، کم، متوسط و زیاد تقسیم شد.
نتیجهگیری: از آنجا که بیش از 28% از منطقه در کلاس حساسیت متوسط به بالا قرار دارد، کاربرد تکنیکهای حفاظت خاک در برابر قدرت فرسایندگی باد نظیر بادشکن، بذرپاشی و کاهش چرا در این مناطق(بهخصوص پهنههای شمالغربی) ضروری است.
Aims & Backgrounds: Considering the fact that a large part of our country is in arid and semi-arid regions and every year wind erosion and dust storms cause significant damages to the country's bio-economic resources, it is necessary to study this phenomenon. This study investigated the erosion rate of geomorphological facies of Gonabad city in relation to wind erosion.
Methodology: The wind erosion intensity was determined using wind tunnel and experimental model of IRIFR1. In the region, 17 facies were identified and mountainous and non-covered areas and areas that were not potentially dusty were excluded from the study. Sampling operations were performed on the remaining 14 facies. The samples were weighed and placed in a wind tunnel at 10 m / s for 10 minutes and then weighed again.The weight difference indicates the amount of wind erosion from a given level.Also in the IRIFR1 model 14 facies were weighted according to expert opinion.
Findings: According to the results of wind tunnel, wind erosion in the study area was highest in sand dune facies and in low and high plains and relatively high water erosion was lowest and according to IRIFR1 model in sand dunes was highest and in low and high plains and low water erosion and high pebbles were the least. Wind erosion sensitivity map was prepared in the study area and divided into five classes of rock mass and non-erosion, very low sensitivity, low, medium and high sensitivity.
Conclusion: Given that according to the analysis of samples in the wind tunnel, more than 28% of the area is in the medium to high sensitivity class, applying soil protection techniques against wind erosive power such as windbreakers, seeding and grazing reduction in these areas (especially the area Northwest) seems necessary.