چکیده:
حفاظت از ساختمانهای بنایی دارای ارزش تاریخی و فرهنگی در مقابل بلای طبیعی زلزله، برای نسلهای آینده از هر جهت لازم است. بهرهگیری از روشهای برگشتپذیر و نوین در مقاومسازی ساختمانهای دارای ارزش تاریخی، به نحوی که ضمن بهبود عملکرد آن حین زلزله، کمترین دخل و تصرف را در معماری و سازه ساختمان ایجاد کند، در سالهای اخیر مورد توجه محققین قرار گرفته است. در مطالعه حاضر با مقاومسازی دیوارهای مصالح بنایی با استفاده از مصالح FRP (Fiber Reinforced Polymer) و به روش NSM (Near Surface Mounted)، که از روشهای نوین در عرصه مقاومسازی ساختمانهای بنایی تاریخی بوده و تاحدود زیادی ویژگیهای ذکر شده را دارد، تغییر رفتار لرزهای ساختمان قبل و بعد از مقاومسازی مورد بررسی قرار گرفته است. برای این منظور ساختمان مورد مطالعه (ساختمان آموزشی شماره یک دانشگاه هنر اسلامی تبریز) به صورت سهبعدی و به روش قاب معادل در نرمافزار 3Muri مدلسازی گردید. برای ارزیابی رفتار لرزهای ساختمان و همچنین تأثیر روش مقاومسازی در این رفتار، از شاخص ایمنی تعریف شده در " راهنمایی ارزیابی و کاهش خطر لرزهای بناهای تاریخی میراث فرهنگی" کشور ایتالیا استفاده شده است. شاخص انتخاب شده تابعی از مقاومت برشی ساختمان، لرزهخیزی منطقه، نوع خاک و سطح عملکرد مورد نظر میباشد. محاسبه شاخص ایمنی برای سطوح عملکردی مورد نظر و بر اساس نتایج حاصل از تحلیل بار افزون، توسط نرمافزار 3Muri صورت گرفته است. نتایج حاصل از ارزیابی ساختمان نشان داد که تقویت دیوارهای باربر ساختمان به روش NSM به همراه اضافه کردن دیوارهای بنایی مسلح جدید، موجب افزایش قابل توجه مقاومت لرزهای آن میشود. به طوری که میزان شاخص ایمنی در بعضی موارد مخصوصاٌ راستای عرضی (ضعیف تر) ساختمان 7/1 تا 6 برابر میشود. نتایج حاصل در مطالعه حاضر صرفاً بر اساس مدلسازی عددی بوده و تنها از یک شاخص برای ارزیابی رفتار لرزهای ساختمان استفاده شده؛ بنابراین نیاز است که در این زمینه کارهای تئوری و آزمایشگاهی بیشتری انجام گیرد.
The high vulnerability of the cultural due to seismic actions urged researchers to retrofit them using reversible and compatible techniques. The application of fiber reinforced polymer (FRP) for enhancing the structural behavior of masonry buildings under seismic actions, has been studied by many researchers. The near-surface mounting (NSM) technique is a relatively new retrofitting approach that involves bonding FRP bars/strips inserted into grooves cut of mortar joints. This method is an appropriate technique to be used in seismic retrofitting of heritage buildings, because of the low influence on the global mass, high strength-to-weight ratios, minimum durability concern, ease of handling, flexibility and fast installation that improve on-site productivity, low impact of building functions, and low architectural and structural interventions. No.1 Educational heritage building of Tabriz Islamic Art University has flexible diaphragms with unreinforced masonry walls as lateral and gravitational resisting system. Masonry walls has no tie beams or columns and appropriate connection to the floors. Furthermore, the building has irregularity in plane because of length to width ratio more than 3. Another deficiency of this building to resist seismic load is related to the existence of small percentage of masonry wall in transversal direction compared with longitudinal direction, which can be result in torsional irregularity in the structure. The aim of this paper is to investigate the effectiveness of applying NSM technique on seismic performance of this heritage building. For this purpose, a 3D Equivalent frame model was created in 3Muri software to simulate the structural behavior of strengthened masonry walls. The masonry was modeled by macro-modeling approach and FRP bars/strips was modeled as attaching to the masonry walls. A safety Index value according to "Guidelines for evaluation and mitigation of seismic risk to cultural heritage", have been calculated to evaluate the seismic behavior of the building before and after applying retrofitting method. The selected safety index depends on shear strength of the structure, site seismic hazard zone and desired building performance level. Nonlinear static analysis has been employed by 3Muri software to evaluate the safety index for selected limit states including Ultimate Limit State (SLU) and Damage Limit State (SLD). The distribution of lateral load is done in two different modes; proportional to the shape of the first mode and proportional to story mass. Based on the results of twenty-four pushover analysis, it has been concluded that inserting the FRP strips to the masonry walls and adding new masonry walls reinforced by FRP bars, increase the safety index significantly in both directions, especially in the transversal direction. Also it has been observed that shear strength of the building increased considerably after applying the retrofitting design relative to the existing condition. More uniform distribution of the safety index between different analysis was another positive effect of using this technique. The results in this paper demonstrated the advantages of using NSM technique for seismic performance of heritage buildings and are based on a numerical modeling and pushover analysis which uses the performance criteria of safety index, and more experimental and numerical studies are proposed for future studies.