چکیده:
امروزه طراحی یک گیرنده هوشمند بهمنظور شناسایی و آشکارسازی کور سیگنال در ارتباطات مبتنی بر سیگنال برست بسیار ضروری است. در این نوع گیرندهها اولین و مهمترین گام آشکارسازی، تشخیص حضور سیگنال و تعیین نقاط ابتدایی و انتهایی برستها بهمنظور استخراج اطلاعات است. در این مقاله، روش جدیدی برای آشکارسازی کور سیگنال برست ارائه میگردد. در روش پیشنهادی نقاط ابتدا و انتهای برستها که درواقع لبههای سیگنال هستند با روش تبدیل موجک بهدست میآیند. معیار تشابه دایس، معیار خطای برست، معیار خطای زمان سکوت و معیار خطای کل برای بررسی عملکرد آشکارساز ارائه شده است. نتایج حاصل از شبیهسازی آشکارساز تبدیل موجک در کانال گوسی بهعنوان نمونه برای طول برستهای بلند، ضریب دایس در سیگنال به نویز dB2- به 9768/0 میرسد که نشاندهنده عملکرد مناسب روش پیشنهادی در مقایسه با روشهای موجود در این زمینه است.
Today, the design of an intelligent receiver is essential for identification and blind detection of signals in the communications that are based on the burst signal. The first and most important step in this type of receiver detection, is signal presence detection and determination of the start and end points of the bursts for the purpose of extracting information. In this paper, a new method for blind detection of the burst signal is provided. In the proposed method, the beginning and end of bursts, which are actually the edges of the signal, are obtained by wavelet transform. Dice similarity criterion, burst error criterion, silence time error criterion and total error criterion are applied to investigate the detector performance. For long bursts taken as an example, the results of the wavelet transform detector simulation in the Gaussian channel, indicate that in the signal to noise ratio of -2 dB, the dice coefficient is around 0/9768 which shows the proper performance of the proposed method compared to the existing methods in this field.