چکیده:
توزیع ژئوپلیمر با استفاده از خاکستر بادی، GGBS و محلول فعال کننده، برای استحکام سازه و کاهش انتشار گاز CO2 از طریق استفاده بهتر از جایگزین سیمان، ضروری است. پس از تهیه مخلوط بتن AS و ریزدانهها، مانند دانههای مکعبی و استوانهای، نمونه خشک شده و برای تعیین استحکام فشاری مورد آزمایش قرار گرفته است. استحکام بتن ژئوپلیمری با قرار دادن آن در مواد شیمیایی (HCL و MgSO) بررسی شده است. در GPC، آلومین سیلیکات لفاف است که دوباره به اسید یا نمک میپیوندد. درجه تغییر بتن به صورت M20، M30، M40، M50 و M60 به کار رفته است. این نمونهها به طور جداگانه به مدت 90 روز در محلول منیزیم سولفات و هیدروکتریک اسید 5/0 غوطه ور شدهاند. برای ارزیابی تاثیر اسید و نمک در تخریب سطح و عمق بتن ژئوپلیمری تغییرات وزن و استحکام طی این 90 روز بررسی شدهاند. نتایج نشان دادهاند که بتن ژئوپلیمری در مقایسه با بتن معمولی مقاومت بسیار بالاتری در برابر حمله اسید و سولفات دارد.
The distribution of geopolymer using ash of air, GGBS and activating solution is essential for structural strength
and reducing CO2 emissions through better use of cement substitutes. After mixing AS concrete and fine grains,
such as cubic and cylindrical grains, the specimen was dried and tested for compressive strength. The strength of
geopolitical concrete has been investigated by placing it in chemicals (HCl and MgSO).In GPC, aluminum
silicate is a wrapper that joins again with acid or salt. The grade of concrete change has been used as M20, M30,
M40, M50 and M60. These specimens have been immersed in a solution of magnesium sulfate and hydroxycut
5% separately for 90 days. Changes in weight and strength over these 90 days have been investigated in order to
evaluate the effect of acid and salt on the degradation of geopolitical concrete surface and depth.
Keywords: Concrete, Durability Test, Concrete StrengthThe distribution of geopolymer using ash of air, GGBS and activating solution is essential for structural strength
and reducing CO2 emissions through better use of cement substitutes. After mixing AS concrete and fine grains,
such as cubic and cylindrical grains, the specimen was dried and tested for compressive strength. The strength of
geopolitical concrete has been investigated by placing it in chemicals (HCl and MgSO).In GPC, aluminum
silicate is a wrapper that joins again with acid or salt. The grade of concrete change has been used as M20, M30,
M40, M50 and M60. These specimens have been immersed in a solution of magnesium sulfate and hydroxycut
5% separately for 90 days. Changes in weight and strength over these 90 days have been investigated in order to
evaluate the effect of acid and salt on the degradation of geopolitical concrete surface and depth.
خلاصه ماشینی:
پس از تهیه مخلوط بتن AS و ریزدانهها، مانند دانه های مکعبی و استوانه ای، نمونه خشک شده و برای تعیین استحکام فشاری مورد آزمایش قرار گرفته است.
برای ارزیابی تاثیر اسید و نمک در تخریب سطح و عمق بتن ژئوپلیمری تغییرات وزن و استحکام طی این 90 روز بررسی شده اند.
مواد مورد نیاز برای تولید بتن ژئوپلیمری در شکل نشان داده شده است.
اجزاء بتن ژئوپلیمری {مراجعه شود به فایل جدول الحاقی} در انحطاط قالب گیری و پخت در آزمایشگاه خاکستر بادی و ریزدانه های ریز، ابتدا به صورت خشک برای نزدیک به 3 دقیقه در مخلوط کن هایی با ظرفیت 50 بهتر مخلوط شدند.
وزن بتن ژئوپلیمری با افزایش غلظت اسید، کاهش می یابد و همین اثر پس از 90 روز غوطه وری در اسید دیده شد و ///// نمونه GPC پیش و پس از غوطه وری در جدول 2 نشان داده شده است.
وزن نمونه ها {مراجعه شود به فایل جدول الحاقی} )به تصویرصفحه مراجعه شود) شکل 5- محلول MgSO4 نتایج و بحث استحکام فشاری بتن سیمانی و بتن ژئوپلیمری از گریدهای مختلف بتن، در برابر مقاومت اسید مکعب ها شده اند.
استحکام دیده شده برای گریدهای M20، M30، M40، M50 و M60 در بتن ژئوپلیمری به است از 25/7 %، 8/6%، 5/2% و 4/7%.
Development and properties of low calcinm fly ash absedgeopoloymer concrete, Research report GCI, Curtin University of technology Perth, Australia.
Experimantal evaluation durability of fly ash- based geopolymer concrete in the marine environment.