چکیده:
یهدف البحث الحالی إلی إجراء دراسة تجریبیة لبیان مدی تأثیر اختلاف التراکیب النسجیة علی جودة الأداء الوظیفی لأقمشة التنجید. وقد استخدم فی الدراسة نوعان مختلفین من الخامات وهما (قطن 100% - مخلوط قطن / بولی استر) وذلک لمعرفة تأثیر التراکیب النسجیة علی کل منهما، وکانت التراکیب النسجیة المستخدمة هی (سادة 1/1 – مبرد 3/1 - مبرد 3/1-2/2 – أطلس 8 – کریب – مبرد مضفور – شبیکة تقلیدیة – هنیکوم). وبعد تنفیذ عینات الدراسة طبقاً للمواصفات والمتغیرات المحددة تم إجراء الاختبارات اللازمة لتحدید مستوی الأداء الوظیفی للأقمشة المنتجة، ثم تم معالجة البیانات إحصائیاً من خلال أشکال الأعمدة بالإضافة إلی استخدام أسلوب تقییم الجودة الکلیة للأقمشة المنتجة لخواص قوة الشد واستطالة القماش فی اتجاه اللحمة ومقاومة الاحتکاک ونفاذیة الهواء ودرجة الصلابة للأقمشة. وقد توصلت الدراسة للنتائج التالیة: 1. الترکیب النسجی الهنیکوم هو الأفضل لتقییم الجودة الکلیة بالنسبة لجمیع خواص الأداء لخامة قطن 100% وذلک بمعامل جودة (79. 6%). 2. الترکیب النسجی المبرد المضفور هو الأفضل لتقییم الجودة الکلیة بالنسبة لجمیع خواص الأداء لخامة مخلوط (قطن /بولی استر) وذلک بمعامل جودة (94. 2%). وقد قدمت الدراسة بعد ذلک مجموعة من التوصیات والمقترحات لتطویر مستوی جودة الأداء الوظیفی لأقمشة التنجید مما یساهم فی تطویر جودة المنتجات النسجیة المصریة
The aim of this research is performing the experimental study to show the
Effect of the difference of the Fabric structures on the quality of functional
performance for Upholstery Fabrics .
The study uses two Basic variable with multi level for Each variable as
follows:
- The type of materials: (cotton 100% - Blended (Cotton /Polyester 50%)).
- Fabric structure : (Plain weave 1/1 — Twill weave 3/1 —- Twill weave 3/1- 2/2
— satin weave8 — crepe weave — whipcord twill weave — imitation cauze
weave —- Honeycomb weave ).
After performing the sample of the study according to the specified
variable , we perform the required tests to measure the level of functional
performance quality of the product fabrics. then we deal the statically with bar
chart , in addition ,we use the technique of the Quality properties to product fabric
(radar chart) of the tensile strength and Elongation test of Fabric , Air permeability
test , Stiffness test and Abrasion Resistance test .
The study has the following results:
1- The best Fabric structures to achieve the functional performance for
material cotton 100% is Honeycomb weave by quality coefficient
(79.6%).
2- The best Fabric structures to achieve the functional performance for
material Blended (Cotton /Polyester 50%) is whipcord twill weave by
quality coefficient (94.2%).
Finally, the study produces some suggestion to develop the leve] of Quality
the Functional Performance of Upholstery Fabrics Which Participate in developing
the Quality of Textile product