Abstract:
زمینه و هدف: منحنیهای شکنندگی و آسیبپذیری لرزهای ابزار مهمی در بررسی قابلیت اطمینان لرزهای ساختمانها میباشد و کاربرد گستردهای در مطالعات ریسک لرزهای شهرها دارد. تاکنون مطالعات جامعی در زمینه ارزیابی شکنندگی لرزهای ساختمانهای بتنی سازگار با آییننامه در ایران انجام نشده است. انجام چنین مطالعاتی برای ارزیابی کفایت آیین نامههای طراحی لرزهای ساختمانها ضروری است.
روش: در این مقاله با طراحی ساختمانهای بتنآرمه با سیستم باربر جانبی با 4، 8 و 15 طبقه، بر اساس سه ویرایش آخر استاندارد 2800 ایران، توابع شکنندگی لرزهای برای نتایج طراحی برای 9 حالت مختلف ارائه خواهد شد. به این منظور پس از طراحی سازههای تعریف شده مطابق مبانی استاندارد 2800 ایران و مبحث 9 مقررات ملی ساختمان، یک قاب مبنا از هر حالت در نرمافزار المان محدود OpenSEES مدلسازی شد. از 22 شتابنگاشت مرجع برای تحلیل تاریخچه زمانی غیرخطی فزاینده استفاده شد. معیار بیشینه جابجایی نسبی طبقات برای دو حالت حدی ایمنی جانی و آستانه فروریزش، مطابق نشریه شماره ۳۶1 سازمان برنامه و بودجه در ارزیابی تحلیلهای غیرخطی فزاینده مورد استفاده قرار گرفت.
یافتهها: با استفاده از تحلیل آماری نتایج تحلیلهای غیرخطی فزاینده مقادیر شتاب میانه شکنندگی و انحراف معیار برای دو حالت حدی مورد نظر، برای هر کدام از مدلهای مورد بررسی به دست آمد.
نتیجهگیری: نتایج نشاندهنده کاهش شکنندگی لرزهای ساختمانهای قاب خمشی بتنی طراحی شده با ویرایشهای جدیدتر استاندارد 2800 میباشد.
Background and objective: Developing fragility and vulnerability functions are important tools in seismic reliability assessment
of buildings and are widely used in regional seismic risk studies. To date sufficient studies for developing analytical fragility
functions for Iranian code-conforming buildings have not been carried out. Performing such studies are necessary to assess the
adequacy of Iranian seismic design codes.
Method: In this paper, by designing 4, 8 and 15 storey concrete reinforced concrete buildings based on the latest three editions
of Iranian Standard 2800, seismic fragility functions will be estimated for the 9 different design results. For this purpose,
after designing the structures defined in accordance with the procedures in Iranian Standard 2800 and the National Building
Code, Chapter 9, a nonlinear model of each case was developed in the OpenSEES finite element software. Nonlinear material
properties as well as P-Δ effects were considered in the models. Twenty-two reference ground motion records were used to
perform the incremental dynamic analyses. The relative performance criteria according to publication No. 361 of the Planning
and Budget Organization of Iran were employed in the evaluation of the results of nonlinear analyses.
Findings: The results were applied in statistical analysis to estimate the seismic fragility functions and corresponding parameters.
Conclusion: The results show the trend of change in the seismic fragility for the frames with different height and conforming
different editions of the Standard No. 2800.