خلاصة:
امروزه ذرات فلزی به پلیمرهای مورداستفاده در بستهبندی مواد غذایی اضافه میشوند تا خواص مکانیکی و ضدمیکروبی را بهبود دهند. در این مطالعه خواص ضدمیکروبی پوششهای نانو کامپوزیت با دانسیته کم (LDPE) حاوی 5/17، 5/12، 5/7 و 5/2 درصد نانوذرات نقره بررسی گردید. برای تولید نانوذرات نقره روش احیاء شیمیایی با استفاده از احیاکننده تریسدیم سیترات انتخاب شد. بهمنظور تأیید سنتز نانو ذرات نقره، مشخصهیابی توزیع ذرات نقره و ساختار کریستالی نقره بهترتیب از آزمونهای UV-Visible، SEM و XRDاستفاده شد. نانو ذرات بلورین با متوسط اندازه 20 نانومتر تأیید شدند. بهمنظور بررسی خاصیت ضدمیکروبی پوششها، رشد باکتری در حضور پوششهای نانو نقره با درصدهای مذکور به روش سنجش دانسیته نوری (OD) بهوسیله دستگاه اسپکتروفتومتر در طولموج 600 نانومتر انجام گرفت. میزان مهاجرت ذرات نانو نقره نیز اندازهگیری شد. نتایج نشان داد که پوشش حاوی 5/17درصد نانو نقره بیشترین تأثیر را داشت و پوشش حاوی 5/2 درصد فاقد هرگونه تأثیر بود. همچنین مقایسه تأثیر پوششها بر اشریشیا کولای و استافیلوکوکوس اورئوس نشان داد که تأثیر پوششها روی استافیلوکوکوس اورئوس بیشتر بوده است. نتایج حاکی از وابستگی بین درصد نانوذرات نقره استفادهشده و خاصیت ضدمیکروبی بود. بهاینترتیب که با افزایش درصد نانوذرات نقره، خاصیت ضدمیکروبی افزایش پیدا کرد. همچنین با افزایش درصد نانوذرات نقره میزان رهایش نانوذرات از پوشش نیز افزایش یافت. درنهایت با توجه بهقرار گرفتن میزان مهاجرت نانو ذرات نقره از هر چهار نوع پوشش نانوکامپوزیتی در محدوده مجاز، پوشش 5/17 درصد بهعنوان کارآمدترین پوشش انتخاب شد.
Today, metal particles are added to polymers used in food packaging to improve their mechanical and antimicrobial properties. In this study, the antimicrobial properties of low-density polyethylene nanocomposite (LDPE) containing 17.5%, 12.5%, 7.5%, and 2.5% silver nanoparticles were investigated. UV-Visible, SEM, and XRD tests were used to Confirmation of the synthesis of silver nanoparticles, characterization of silver particle distribution, and silver crystal structure. Crystal nanoparticles with an average size of 20 nanometers were approved. To evaluate the antimicrobial properties of silver nanocomposites, bacterial growth in the presence of nanosilver films with the mentioned percentages was measured by optical density (OD) method by spectrophotometer at a wavelength of 600 nm. Besides, the migration of nanoparticles was measured. The results showed that the coating containing 17.5% nanosilver had the highest effect and the coating containing 2.5% nanosilver had the lowest (ineffectiveness) compared to other coatings. Also, comparing the effect of coatings on two types of food pathogens, E. coli and S. aureus, showed that the effect of coatings on S. aureus was higher. The results showed a correlation between the percentage of silver nanoparticles used and antimicrobial properties. Also, with increasing the percentage of silver nanoparticles, the release rate of nanoparticles from the coating increased. Finally, due to the migration of silver nanoparticles from all four types of nanocomposite coatings in the permitted range, 17.5% coating was selected as the most efficient coating.